Need help?Do you have a question about the TSL Tallyman TMC-1 and is the answer not in the manual?
General| Type | Tally Controller |
|---|---|
| Power | External Power Supply |
| Input Voltage | 12V DC |
| Power Consumption | 5W |
| Communication Interface | Ethernet |
| Operating Temperature | 0 to 50°C |
Guidelines for installing the TM1 Tallyman controller in a standard 19-inch rack.
Details the connection ports available on the TM1 controller for various functions.
Provides pinout details for the Ethernet connection on the TM1 controller.
Details pin assignments for RS422 and RS232 serial control ports on TM1.
Explains D37 socket pinouts for Tally 1 and Tally 2 input/output connectors on TM1.
Describes how to activate tally inputs and outputs using ground or OV connections.
Guides initial setup via terminal program, including default IP parameters for TM1.
Details the connection ports available on the TM2 controller for various functions.
Provides pinout details for the Ethernet connection on the TM2 controller.
Details pin assignments for RS422 and RS232 serial control ports on TM2.
Explains D37 socket pinouts for Tally 1, 2, 3 & 4 on the TM2 controller.
To Next Page
