REPEATER
The repeater is used to strengthen/amplify the sensor signal forward to
the display. A repeater is packaged with this system.
Wire the repeater into a 12v source that will be constant while driving.
The red light on the repeater will illuminate when operaonal. The unit
is waterproof and can be mounted inside or out.
There is no set-up needed for the repeater.
SENSOR SPECIFICATIONS
Temperature Operang Range -40° F – 176° F / -40° C
– 80° C
Storage Temperature Range -40° F – 185° F / -40° C
– 85° C
Pressure Range 0 – 196 PSI / 0 – 13.5
bar
Pressure Accuracy Range +/- 3 PSI / +/- .02 bar
(with a digital gauge)
Temperature Accuracy Range +/- 3°
Transmission Power <10dBm
Transmission Frequency 433.92 MHz
Approximate Baery Life 3 – 5 years
Physical Sensor Size 1.1” Diameter x 1.26”
Height
28mm Diameter x
32mm Height
Sensor Weight 0.77 oz. / 22 grams
Repeater
Truck System Technologies - 4250 Keith Bridge Road, Suite 200, Cumming, GA 30041
info@tsttruck.com
To Next Page
Loading...