TTK FG-SYS - End Termination Plug

23
3.5 End Termination Plug
3.5.1. FG-TMC End Termination Plug
(Use Only with FG-EC or FG-AC Sense Cables)
Each circuit of sense cable must be end with an End Termination Plug. FG-TMC is used for the
circuit continuity.
3.5.2. FG-TMX End Termination Plug
(Use Only with FG-ECX or FG-ACX Sense Cable)
3.5.3. FG-TMOD End Termination Plug
(Use Only with FG-OD Sense Cable)