8. Electrical schematic
16
9. Packaging, transportation
The vehicle is packed in palletized wooden boxes, which
are not allowed to be overturned or inverted during
transportation, and are not allowed to collide when lifting and
loading, and do not damage the outer surface of the vehicle
when unpacking.
10 . Warning (Caution)
(1) Before operating the car, please read the instructions and
get familiar with the performance of the car.
(2) To avoid damage to the goods and the car, please do not
press the up-down button or switch the up-down button
quickly and frequently while the car is running.
(3) This car is an electric cart without the need for rapid and
high frequency form shaking the handle!
(4) Do not load heavy objects onto the forks in a hurry!
(5) strictly prohibit the use of overload, do not carry additional
weight, do not exceed the operating load, the chances of
accidents occurring in this behavior is high.
(6) The center of gravity of the cargo should be among the two
forks, otherwise it may damage the forks or cause the cargo to
fall down during operation.
(7) Loose or unstable cargo is not allowed to be loaded!
(8) Do not rest the cargo on the car for a long time!
(9) is strictly forbidden to make sharp turns in narrow passages,
when you should slow down and turn slowly to ensure the
safety of people and goods.
(10) When the truck is not in use, the forks should be lowered
to the lowest position.
(11) It is strictly forbidden to place any part of the body under
heavy objects and forks!
(12) This truck is suitable for use on flat ground or flat working
platform, and long-term parking on slopes is strictly prohibited.
17
To Next Page
Loading...
General