10
RECIPE MODE: ONE-TOUCH CONTROLLER
Recipe Mode
The oven is preprogrammed with recipe settings at the time of manufacture and is ready to operate out of the
box. New menu settings can be loaded via USB or programmed manually. If settings are present, the conveyor
oven will cook only in manual mode.
The sequence of steps below may vary, and some may not apply.
Step 1: Power Icon
Touch to begin preheating.
By default, the oven preheats to the lowest
set temperature.
HCT- 4201 / Rev S / January 2024
To Next Page
Loading...
Need help?
General