What to do if my TurboChef Oven has no power?
First, ensure the TurboChef Oven is properly plugged into a working electrical outlet. If it is, check the wall circuit breaker to confirm it's on. If the breaker has tripped, reset it, and then try powering the TurboChef Oven on again.
Why is my TurboChef Oven not warming up properly?
If your TurboChef Oven isn't warming up correctly, first, make sure it's not in the Off state by touching “Menu” and selecting a set temperature. Check that the cook cavity door is fully closed. If the issue persists, the oven might have been switched off at the main circuit breaker. To resolve this, turn off and unplug the oven for two minutes, then plug it back in, switch on the main power supply, and try setting a temperature again. Also, check if the high-limit thermostat tripped. If so, press the reset button on the oven's rear wall near the power cord.
Why is my TurboChef Oven not cooking properly?
If your TurboChef Oven isn't cooking food correctly, start by ensuring the oven model is set to “SOTA” in the Info Mode Manufacturing screen. Check that the oven is clean, as grease, carbon, or food debris can interfere with cooking. Verify that you've selected the correct food group and item name for your product. Make sure the product was in the correct starting state (chilled or frozen, as required) before cooking. Finally, confirm that the product's weight and size match the typical product specifications.
General| Model | Sota i1 Series |
|---|---|
| Power Source | Electric |
| Control Interface | Touchscreen |
| Pre-Programmed Menus | Yes |
| Exterior Finish | Stainless Steel |
| Power Supply | 208/240 V, 60 Hz, 1-phase |
| Cooking Modes | Convection, Microwave |
| Cooking Technology | Microwave |
| Warranty | 1 year parts and labor |
To Next Page
