19
INFO MODE
Edit Mode
To enable Edit Mode,
1. Touch the “i” icon when the oven is off or
cooling down.
2. From the Info Mode screen, touch “Login”
to access the Options screen. When prompted,
enter the passcode 9 4 2 8 and then touch
“Enter.”
3. Set “Editing” to “YES” to enable Edit Mode.
The “Edit” icon will appear at the bottom of the
screen in menu mode (see page 7). When “Edit”
is touched from the group select screen, the
operator can:
- Edit the set temperature
- Access the edit items screen
- Name a group
- Delete a group
- Move a group
When “Edit” is touched from the item select screen,
the operator can:
- Edit item cook settings (page 23)
- Name an item (page 25)
- Add a recipe from the cookbook (page 26)
- Change the group (page 26)
- Move an item (page 27)
- Delete an item (page 27)
Edit Set Temperature
The menu set temperature should never be changed
to compensate for over-cooking or under-cooking.
If recipe settings are not cooking as desired, consult
your menu developer, authorized distributor, or
TurboChef Customer Support.
To change a set temperature,
1. Place the oven in Edit Mode.
2. Touch the current set temperature.
NOTE: The set temperature will apply only
to the groups adjacent to it. Be sure to check
the temperature for groups 1-8, but also for
groups 9-16.
3. Using the number keys, enter the new set
temperature. The temperature range is 300–
540°F (149–282°C).
4. Touch “ENTER” to confirm the change.
Access Edit Items Screen
Item settings can be edited from the Edit Settings
screen. See page 23 for more details.
Name a Group
To name or edit a group name,
1. Place the oven in Edit Mode.
To Next Page
Loading...
Need help?
General
