16
INFO MODE
Ensuring Connectivity
When the oven is successfully connected to a network, the
word “WiFi” above the toggle will blink.
For help determining the correct network setup informa-
tion, contact your network administrator.
If MAC IP is blank, the oven may not be configured
properly to connect to a WiFi network. Call TurboChef
Customer Support at 800.90TURBO
or +1 214.379.6000.
Sound Volume
Touch “Volume” and use the plus or minus icons or
slider to increase or decrease the oven sound.
Set Date
An accurate date is important for using “auto-on”
and “auto-off” (see adjacent). It also helps ensure the
accuracy of diagnostics and fault condition reporting.
NOTE: The oven may not retain the date if left
unplugged for a prolonged period of time (more than
several hours).
To set the date, touch “Date.” Enter the date in the follow-
ing format - MM/DD/YY. Touch “ENTER” to save the
changes.
Set Time
An accurate time is important for using “auto-on” and
“auto-off” (see adjacent). It also helps ensure the accuracy
of diagnostics and fault condition reporting.
NOTE: The oven may not retain the date if left
unplugged for a prolonged period of time (more than
several hours).
NOTE: The clock will not automatically update for
Daylight Savings Time.
To set the time, touch “Time.” Enter the time in 24-hour
format (8:30 p.m. = 20:30). Touch “ENTER” to save the
changes.
NOTE: The user interface will automatically convert the
time to 12-hour format.
Auto On YES/NO
“Auto On” is a feature that turns the oven on automati-
cally at a specific time of day.
1. To set auto-on, ensure the time of day is
accurate (adjacent).
2. Toggle the yes/no icon to the YES position to
enable Auto On.
3. Select the temperature to which the oven will
automatically heat up.
4. Enter the time in 24-hour format (8:30 p.m. =
20:30). Touch “SAVE” to save all changes.
NOTE: The time will automatically convert to
12-hour format when saved.
Auto Off YES/NO
“Auto Off” is a feature that turns the oven off automati-
cally at a specific time of day.
1. To set auto-off time, ensure the time of day is
accurate (see adjacent).
2. Toggle the yes/no icon to the YES position to
enable Auto Off.
3. Enter the time in 24-hour format (8:30 p.m. =
20:30). Touch “SAVE” to save all changes.
NOTE: The time will automatically convert to
12-hour format when saved.
Blinks if connected
To Next Page
Loading...
Need help?
General
