9
240064-1
7.1 • As all ovens of the series are fitted with
an alternating fan motor (clockwise and
anticlockwise rotation), there is no need
for the fan to rotate in any particular
direction. Simply verify, when
commissioning the appliance, that
the fan is balanced and rotates freely.
7 • POINTS TO REMEMBER WHEN MAKING THE ELECTRICAL CONNECTION
6 • ELECTRICAL CONNECTIONS AND EQUIPOTENTIAL BONDING
6.5 • The oven must also be bonded
equipotentially to other equipment in
the kitchen. This connection is made by
wiring a conductor of nominal cross
section 10mm
2
to the corresponding
terminal at the back of the oven, which is
marked with the internationally recognized
symbol. All appliances in the room are
bonded in this way and connected to the
earth system of the building.
6.6 • The electrical safety of this appliance can
be guaranteed only when it is connected
correctly to an efficient earth system, in
compliance with current standards.
To Next Page
Loading...
Need help?
General
