As you use colors, the software will remember up to 10 colors and place them in the little boxes at the bottom of
the scroll wheel color picker. You can reuse them later by clicking on the one you want.
Macro Editor
With the Grip 500 and its configuration software, you can create and assign complex combinations of keystrokes
so that you can do almost anything you want. You can also insert commands and customize the timing / delays
between those keystrokes.
To enable the Macro Editor press the Macro Editor button which will bring up the main macro editor screen.
Creating New Macros
The first step is to create your macro. Press the New button and the above Create New Macro box will popup. Type
in a name for your macro and then press OK.
Then press the Record button. Now all keystrokes that you type will be recorded along with the timing (how fast
you are pressing the buttons). When you have completed your macro click on the Stop button. Your macro is now
ready to assign the any mouse button. If you want to make more detailed adjustments to your macro you can edit
it using the same screen.
To Next Page
Loading...