50
8.4.2 Press and the temperature units will blink. Temperature unit “ °F ” will be selected by default.
Press to select desired temperature unit, then press to confirm and a short beep
will sound.
8.4.3 Once the desired temperature unit is selected, the standard tire temperature value can be
programmed for each set of wheels. Below is chart of the default tire temperature values per
temperature unit:
Temperature units Default tire temperature value
℃ 80 ℃
8.4.4 The tire temperature value of the first set of wheels will begin to blink. Press to
increase/decrease to the standard tire temperature value, then press to set the temperature
value.
8.4.5 The tire temperature value of the next pair of wheels will begin to blink. Repeat step 8.4.4 until
each pair of wheels has been programmed to the desired standard tire temperature value.
8.4.6 When you have completed the Tire Temperature Units settings for all tires, you will hear a short
beep, indicating that the set tire temperature values have been saved successfully. The receiver
will automatically go to the next TPMS parameter setting: “8.5 Tire Sensor ID Pairing to the
Receiver” for that vehicle selection. If no further parameter settings are required, you can hold the
To Next Page
Loading...