If a new gasket leaks, or if a persistent leak develops,
gently clean the sealing surface of both the lid and
body of the unit with a light nylon pan scorer, making
sure you do not remove any metal. Rinse both
surfaces, but do not dry.
Clean both interior and exterior with warm, soapy water
ensuring the elctrical parts are kept dry.
Monitor the rst cycle of the day to check the Air Bleed
Device, which is located inside the lid, audibly “clicks”
shut.
Lubricate underside of body lugs with “Vaseline” if the
lid becomes stiff.
To Next Page
Loading...
