To Next PageTo Next Page
Need help?Do you have a question about the Tuttnauer 55120 1REP and is the answer not in the manual?
Guidance on safe autoclave operation, including daily tests, seal inspection, and chamber cleaning.
Procedures for safely handling and sterilizing contaminated waste.
Important safety notes regarding autoclave usage and door handling.
Explains common cautionary symbols like consult documents, hot surface, and hot steam.
Identifies the symbol for protective earth connection, indicating electrical safety.
Overview of the autoclave's design, capabilities, and operating principles.
Details the components and functionality of the autoclave's front panel.
Guidance on operating the sensitive touch screen interface.
Warnings against operating in dangerous environments and unauthorized access.
Identifies and describes the components of the autoclave's front panel with a diagram.
Explains the data printed by the autoclave's character printer for each cycle.
Instructions for printer maintenance, paper loading, and handling thermal paper.
Safety warnings regarding printer disassembly, hot thermal heads, and power-off conditions.
Emphasizes the use of safety gloves and glasses during loading and unloading.
General guidelines for preparing instruments and loading the autoclave chamber.
Instructions for loading instruments and materials into the autoclave chamber.
Procedures for safely unloading sterilized materials and identifying rejected loads.
Reinforces safety precautions for loading/unloading and entering the chamber/service areas.
Warning against operating the autoclave with dangerous gases and vapors.
Steps to check the touch screen for errors and prepare the autoclave before starting a cycle.
Guide on how to select a sterilization program using the touch screen interface.
Instructions on how to start the selected sterilization cycle using the touch screen.
Procedure for responding to and clearing malfunctions that occur during autoclave operation.
Steps to take at the end of a successful sterilization cycle, including door release conditions.
Instructions on how to safely abort a running sterilization cycle.
Details user tasks for daily, weekly, and before-cycle maintenance.
Caution against using steel wool or steel brush for cleaning the autoclave chamber.
Warning against operating the autoclave with dangerous gases and vapors.
Table of system error messages displayed during standby and their corrective actions.
General| Category | Laboratory Equipment |
|---|---|
| Type | Autoclave |
| Model | 55120 1REP |
| Brand | Tuttnauer |
| Chamber Volume | 20 liters |
| Power Supply | 230V, 50/60 Hz |
| Warranty | 1 year |
