- 10 -
4
Replace your existing doorbell.
5
Restore power at the breaker, and your doorbell is ready for use.
Remove the existing doorbell from
the wall and disconnect the wires.
Lead the wire through the holes on
the bracket before mounting.
Mark the screw holes location and mount
the brackets on your wall with screws.
Wall mount
screw kit
Bracket
mount
screws
Optional Optional
Attach the wires to the doorbell.
Wire extension kits are optional.
Feed the wires back to the wall and
Mount the doorbell to the brackets.
Insert the screw into the
bottom
and tighten with included tool.
Security
screw
Screwdriver
To Next Page
Loading...
