TV Logic LVM-171S User Manual

16 Multi Format LCD Monitor
● GROUP ID
- Used to group the monitors to control the
monitors by group when the monitors
are controlled by using RS-422/485
communication or Network.
● MONITOR ID
- Used to set the ID of each monitor for the
TVLogic control protocol or DYNAMIC UMD
using RS-422/485 communication or
Network.
- Available values are between 0,2,4 ~ 98.
- Right screen in PBP mode is automatically
set to +1 of the monitor ID.
● DHCP
- Used to set DHCP.
● IP ADDRESS / SUBNET MASK / GATEWAY
- Used to set the Network address.
● PORT NO
- Used to set the port number. The default
value is 10262.
● SETTING APPLY
- Used to apply the settings.
● The pin positions are as follows :
[4] GPI
5. Menu Operations
wpuGX
nwp
΁ͺͿ
΁ͺͿ
΁ͺͿ
΁ͺͿ
΁ͺͿ
΁ͺͿ
͸΃΀Ά΁ͺ͵
΁ͺͿ
;΀Ϳͺ΅΀΃ͺ͵
͵͹ʹ΁
ͺ΁Ͳ͵͵΃Ͷ΄΄
΄ΆͳͿͶ΅;Ͳ΄ͼ
͸Ͳ΅ͶΈͲΊ
΁΀΃΅Ϳ΀
΄Ͷ΅΅ͺͿ͸Ͳ΁΁ͽΊ
s}tTX^Xz
uvul
zkpGjohuuls
oktpGjohuuls
|uklyGzjhu
hzwlj{
oV}Gklsh
is|lGvus
tvuv
vu
X`YUX]_UXUXWW
Y\\UY\\UY\\UW
X`YUX]_UXUX
vu
W
W
XWY]Y
REMOTE (RJ-45)
1: Pin1
2. Pin2
3. Pin3
4. Pin4
5. Pin5
6. Pin6
7. Pin7
8. GND
18

TV Logic LVM-171S Specifications

General

Brand	TV Logic
Model	LVM-171S
Category	Monitor
Language	English