TVLogic F-7H - Key Features of the F-7 H Monitor

FHD High Bright Field Monitor 6
• Compatible with various SDI signals
formats (SD/HD/3G)
- This product is compatible with various
SDI signals - 480i, 576i, 720p, 1080i, 1080p,
1080psf
• HDMI(with HDCP) Signal
- This product is compatible with various
HDMI signals.
• HDMI To SDI / SDI To HDMI Conversion
Output
- This product features an HDMI To SDI
conversion output so that video source
from HDMI In terminal can be output
through SDI Out terminal.
- The SDI To HDMI conversion output is also
supported. The video source from SDI In
terminal can be output through HDMI Out
terminal.
• All-in-one type system
- Slim and all-in-one type monitor that
requires no additional accessories, for
optimized space utilization.
• Waveform/Vectorscope/Audio Level Meter
Function
- Waveform & Vector Scope
- Embedded Audio Level Meter
• Audio Out
- Stereo Audio Out through phone Jack
• Knob Control
- Easy to adjust user conguration using the
control knob on the top of the monitor.
• BLUE ONLY / MONO / Focus Assist/ H/V
Delay Function
• Range Error/Luma(Y’) Zone Check(Color/
Zebra Type) Function
• Internal Pattern Generator (0~100% Gray/
ColorBar+Pluge)
• Various Markers & Safety Areas
- Center Marker, Safety Area Marker, Marker
Mat, Marker Size, Fit Marker, Thickness
Adjustment function
• Pixel To Pixel/Zoom Function
- Used to display the original image
resolution without scaling to match a certain
resolution or an aspect ratio.
- Select ‘Pixel to pixel’ to display unscaled
images, and select ‘Zoom’ to enlarge the
original image.
- Zoom Scroll Function (Left/Right, Top/
Bottom)
• Power
- Basically, the product is powered by a
normal DC source.
- The product can be battery-powered.
* DC 6~12V (Typical)
• Additional features
- Camera Mounting Hole x 8, Screen Tally
Function, VESA Mounting Standard,
3600cd/m
2
Brightness, 1,200 : 1 Contrast,
OSD user interface.
F-7H Monitor contains the following features :
2. Main Features