TVS X - Page 51

TVS X User Manual - Rev 0 - As on 16 July 2024
49
Bluetooth pairing
First time Bluetooth pairing
To pair your Android smart phone or
iPhone with your TVS X connected
instrument cluster, via Bluetooth, for
the rst time, follow the procedure as
described below :
1. Switch ‘ON’ the vehicle.
2. Open the app and press the
‘CONNECT’ tab,ensure the smart
phone is near to the vehicle.
3. The app searches for all Bluetooth
devices near by and displays the
list of devices available.
4. The connected instrument cluster’s
Bluetooth name is prexed by TVS
X.
5. Now, select the ‘TVS X’ in app to
initiate the pairing process.
6. For initiating rst time pairing,
logout from the app, login again
using your login credentials and
then press ‘CONNECT’.
Steps to “Forget This Device” in
iPhone:
If the user needs to connect multiple
iPhones with the single instrument
cluster, the previous iPhone has to be
forgotten using “Forget This Device”
from Bluetooth settings in the following
manner:
Note
During the course of pairing process,
if there is any occurrence of error, the
connected instrument cluster should
be turned ‘OFF’ and ‘ON’, and the
application also need to be restarted.
Please remember that all the smart
phones are not compatible for pairing
with the TVS X connected instrument
cluster.
During the search of Bluetooth devices
in app, if the vehicle connected
instrument cluster’s Bluetooth device
ID is not visible, try for one or two more
iterations.