Tyco Electronics T212M-PRINTER - Cleaning the Platen Roller

English
EIL/MAN/002: REVISION 6 Date: July 2007 Page 19
10.2 Cleaning the Platen Roller
Over time the platen picks up adhesive dust which requires occasional cleaning. This can
be done using a clean lint-free cloth lightly moistened with isopropyl alcohol.
Turn Printer OFF
Unplug all power
and interface leads.
Gently wipe top of
platen
Advance platen
One-Sixth (1/6) turn
Repeat steps until
platen is clean
Note: Let the platen dry for at least one minute before loading media.