Tyco AutoPulse Z-20 User Manual

6
AUTOPULSE Z-20 Agent Releasing Panel Operator’s Manual (579-1165AR)
Processing Alarms: There are three actions that may be taken when an alarm condition occurs:
1. Acknowledge an Alarm
2. Silence the Alarm
3. Reset the System
Each step is explained in detail in the rest of this section.
Acknowledge an Alarm: Two types of acknowledging modes can be configured on the panel:
1. Global Acknowledge
All the zones inside the Zone Alarm list are acknowledged at the same time.
2. Individual Acknowledge
Each zone inside the Zone Alarm list is acknowledged separately.
Global Acknowledge
Tap ACK.
Note: Acknowledging an alarm does not silence the horns. You need to silence an alarm as shown in the section Silence the Alarm.
Individual Acknowledge
Tap the unacknowledged alarm from the Zone Alarm List.
Note: The unacknowledged alarms display Press to acknowledge on the top right of the button.
Fire Alarm in System
Date
Time
First of 1
Date
PULL STATION 1
FIRE ALARM
ACK
1
Alarm Functions Menu
Fire Alarm in System
Date
Time
First of 1
Date
PULL STATION 1
FIRE ALARM
ACK
1
Alarm Functions Menu
Alarm Conditions, Continued

Tyco AutoPulse Z-20 Specifications

General

Brand	Tyco
Model	AutoPulse Z-20
Category	Control Panel
Language	English