Tyco RAVEN Institutional TY3281 - Page 7

FRONT VIEW
SPRINKLER WRENCH
FRONT VIEW
NOTES:
COLOR SIN APPLICATION
TO BE REMOVED
PROTECTIVE CAP
SPRINKLER
ONLY AT TIME OF
INSTALLATION
TO THIS SURFACE TO ENSURE
A LEVEL MAY BE APPLIED
SPRINKLER IS INSTALLED WITH
1/2" DRIVE
ACCEPTS
DEFLECTOR PARALLEL TO FLOOR
ALIGN WITH SPRINKLER
UNIQUELY SPACED TO
WRENCH PRONGS ARE
WRENCHING NOTCHES
PROPER ORIENTATION OF
THE WORD "UP" INDICATING
WRENCH EMBOSSED WITH
THE SPRINKLER WITH THE
PLATE
ESCUTCHEON
SIDEWALL
HORIZONTAL
RAVEN
SPRINKLER
SPACER RING
ADJUSTMENT
(AS NECESSARY
MAXIMUM 2)
RAVEN
SURFACE
MOUNTING
PROPER DEPTH FROM
FITTING LOCATED AT
SPRINKLER REDUCING
AND PERPENDICULAR TO
MOUNTING SURFACE
HOLE
CLEARANCE
W-TYPE 25
WRENCH
SIN (SPRINKLER IDENTIFICATION
NUMBER) COLOR DOT PROVIDES
THE FOLLOWING INFORMATION:
1.
RED TY3381 HSW
STANDARD
HSWPURPLE TY3382
EXTENDED
FOR HSW SPRINKLERS, THE SIN
COLOR DOT ALSO PROVIDES THE
MEANS OF VISUALLY VERIFYING
2.
THAT THE DEFLECTOR IS IN THE
PROPER ORIENTATION. USING
THE SPRINKLER WRENCH, THE
SIN COLOR DOT
NOMINAL DIA.
1/32" (0,7 mm)
(SEE NOTES 1 AND 2)
COVERAGE
COVERAGE
ASSEMBLY
LINK
SPRINKLER IS TO BE POSITIONED
SO THAT THE SIN COLOR DOT
FACES UP (SEE ALSO "WRENCH
FRONT VIEW").
SIN COLOR DOT FACING UP
ASSEMBLY
LINK
DEFLECTOR
ENCLOSED
DOT
COLOR
SIN
TOP OF
FIGURE 4
HORIZONTAL SIDEWALL SPRINKLER INSTALLATION
WITH W-TYPE 25 SPRINKLER WRENCH
TFP651 Page 7 of 10