BACKHOE MOUNTING
CAUTION:
CAUTION:CAUTION:
CAUTION:
This is the Backhoe's Operator's manual for Safety Precautions and Tractor Preparations.
STEP 5.
STEP 5.STEP 5.
STEP 5.
STEP 6.
STEP 6.STEP 6.
STEP 6.
STEP 7.
STEP 7.STEP 7.
STEP 7.
Install the Mounting Bracket Pins into the holes. Raise the boom and stabilizers from the ground.
Move the tractor to put the subframe front side into the loader midmount slowly. Set the
subframe crosser parallel to the mounting bracket by using the backhoe control levers to lower
the stabilizers and boom to raise the subframe.
Release the parking brake of tractor, move the tractor rearward very carefully until the subframe is
fully engaged in both mounting devices on the tractor.
- 19 -- 19 -
To Next Page
Loading...