E
MAINTENANCE
14
When the urea amount in the tank is
below 25%, the urea level warning lamp
comes on. In this case, add more urea
into the tank.
1. Stop the engine and remove the
urea filler cap.
2. Pour urea through the filler port
until the urea level reaches the
mark on the gauge which is located
on the right side of the cap.
3. Turn the filler cap clockwise
completely.
※ The urea level gauge is located on the
multi-display.
▶ UREA TANK FILLER PORT
▶ UREA FILTER REPLACEMENT
The engine power is limited when
driving only with 10% of the full urea
capacity.
Never add any fluid, such as diesel fuel,
gasoline and alcohol, into the urea tank
other than the recommended urea
(complying with ISO22241 or DIN70070).
Do not add urea over the middle mark in
the tank gauge. The tank may overflow.
Also, the tank can be frozen and broken
in winter.
The urea tank gauge is designed to
prevent overflow of the tank. It is not
designed to be used as a level gauge.
The urea level in the tank can be
checked on the multi-display screen.
If using poor-quality urea or fluid other
than the recommended, it can damage
the after-treatment system and other
parts in the vehicle.
If using poor-quality fuel, foreign
materials are collected in the SCR
catalyst, leading to piling up and
breaking of the catalyst.
CAUTION
UREA TANK FILLER PORT
To Next Page
Loading...
