E
MAINTENANCE
E
23
1. Turn off all electric devices.
2. Connect the positive terminal of the
normal battery to the positive
terminal of the discharged battery
with the jump cable.
3. Connect the negative terminal of
the normal battery to the engine
body of the tractor for the
discharged battery with the jump
cable.
4. Firstly, start the engine of the
vehicle with the normal battery.
Then, start the engine of the tractor
with the discharged battery.
5. After the engine is started,
disconnect the negative cable first.
Then, disconnect the positive cable.
▶ JUMP START
6. Charge the discharged battery for
approx. 30 minutes after the engine
is started.
1. Loose wiring terminals can cause
contact failure and damaged
wirings can lead to performance
deterioration of electric devices,
short circuit and fire.
Replace or repair aged and
damaged wirings.
2. If wiring sheath is peeled off, wrap
wiring with insulating plastic tape.
3. If fasteners or bands to fix wirings
are damaged, fix wirings with
clamps.
4. Have wirings checked by your
workshop once a year regularly to
avoid fire.
▶ CHECKING ELECTRIC WIRING
Make sure to connect the positive
terminal first and connect the negative
terminal to the engine body of the
tractor with the discharged battery.
WARNING
To Next Page
Loading...
