TYM T954 - Page 79

C
TRACTOR INSTRUMENTS
C
33
2. Manual mode
It is possible to control the 4WD
function manually by a driver for
easier operation.
Pressing the button once turns on
the lamp and activates the manual
mode. Pressing it once again turns
off the lamp and deactivates the
manual mode.
• Examples of useful conditions of
4WD
The 4WD can be useful under the
following conditions:
1. When cultivating in a field
2. When traction is required on a slope,
in a wet field or for towing a trailer
3. When working in a wet or sandy
field
4. When cultivating on firm soil with a
rotavator to prevent the tractor
from being pushed forward
5. When driving into/out of a field or
going over a field bank
6. Reverse driving-lifting
This function is to lift implement
automatically when vehicle is
driven backward. Pressing the
button once turns on lamp and
activates reverse driving-lifting
function. Pressing it once again
turns off lamp and deactivates
function.
7. Turning-lifting
This function is to lift implement
automatically when vehicle is being
turned. Pressing the button once
turns on the lamp and activates the
turning- lifting function. Pressing it
once again turns off the lamp and
deactivates the function.
 Avoid using the 4WD on a road or hard
soil. The tires can be worn excessively.
 If stopping the engine while the 4WD is
engaged, starting the engine again
automatically engages the 4WD.
IMPORTANT
REVERSE DRIVING-LIFTING TURNING-LIFTING