TYM T954 - Page 84

C
TRACTOR INSTRUMENTS
38
Adjust the drawbar as follows:
1. Use the fixing pin (1) to prevent any
lateral sway.
2. To adjust the distance between the
PTO and drawbar, move the fixing
pin to another hole in the drawbar.
▶ DRAWBAR ADJUSTMENT
When the PTO shaft is not in use, apply
grease and place its cap to it.
▶ PTO SHAFT CAP
 It is dangerous to use an implement at a
high speed if it is designed to be
operated at a low speed.
 Before using an implement, make sure
to read its owner's manual.
CAUTION
 If caught by the PTO shaft, a severe
injury or even death can occur.
 Stay out of the PTO shaft while it is
rotating.
 When the PTO shaft is not in use, fit a
cap to it.
 Also, never remove the PTO safety cover.
DANGER
(1)
PTO SHAFT