C
TRACTOR INSTRUMENTS
C
49
4. Seat belt
Before driving, adjust the length of
the seat belt properly and fit its
tongue into the receptacle until it
clicks.
5. Headrest
The headrest position can be
adjusted to fit to the driver. Its
height can be adjusted by pressing
the lock on the seatback and
headrest mounting section.
6. Seat height adjustment
Pull up or push down the height
adjustment lever to adjust the
seat height in 4 steps. Suitability
of each position is as follows:
A. Standard position
B. When working while observing
the back
C. When working while observing
the front area near the vehicle.
D. When the seat is too low for the
driver
• Lifting seat
- In the position (a) with the seat
empty, push down the height
adjustment lever. Then, the front
section of the seat is lifted, setting
the seat into the position (b).
Make sure to fasten your seat belt to
protect yourself in case of rollover or
collision.
Never adjust the seat during driving.
WARNING
To Next Page
Loading...
