TypeS AC532632 - Charging the Jump Starter; Charging Methods and Notes

7
NOTE: Fully charge the Jump Starter upon receipt. Check battery status periodically and recharge every
2-3 months and after every use to maintain the efciency and to prolong the life of the internal battery.
CHARGING THE JUMP STARTER:
At home:
Micro USB Cable
1. Plug bundled Micro USB Charging Cable into a
USB-A port on a computer or 2A USB wall adapter
(not included).
2. Connect the Micro USB Charging Cable into the
Micro USB Charge Input Port on the Jump Starter.
3. Disconnect the Jump Starter when it is fully charged.
Store the Jump Starter in a safe place when not in use.
USB-A to USB-C Cable /USB-C to USB-C Cable
(cables not included)
1. Plug one end of USB-C Charging Cable into a
USB-A / USB-C port on a 18W (or above) wall
adapter (not included).
2. Connect the other end of USB-C Charging Cable into
the USB-C Charging Input Port on the Jump Starter.
3. Disconnect the Jump Starter when it is fully charged.
Store the Jump Starter in a safe place when not in use.
In Car:
1. Plug bundled Micro USB Charging Cable into
bundled 12V USB Charger then connect it to 12V
socket in vehicle.
2. Connect the Micro USB Charging Cable into the
Micro USB Charge Input Port on the Jump Starter.
3. Disconnect the Jump Starter when it is fully charged.
Store the Jump Starter in a safe place when not in use.
NOTE: In order to reduce the risk of re or electric shock, an adapter
shall be chosen that is suitable for the application and is certied as a
Class 2 or LPS power supply or power adapter.