4. A flashing cursor appears, using the keyboard to input messages, press [ D ] key to
move to the left one, press [ O ] button to the right one, when editing area have content,
press the [
EI ]
key to delete any useless character, otherwise when editing area without
content to return to the higher level menu.
5. After writing the text, press [
m]
to choose to send or save.
6. When on the process of editing, user can choose by pressing the [
m]
key to empty
option to empty ali the content of the editor, quickly return to the higher level menu.
7. Choose the
[DorO]
key to the alias name or ID, and then press
[m]
key to select.
Or press
[D
spending] key to manual dialing, and then press
[m]
button, enter your user
ID and press [
m ]
key.
8. The screen shows message:
<
user/group name or ID
>
cali, sending message are being
confirmed
9. If the messages sent successfully, issued a prompt sound, and the screen displays text
message has been sent.
Or if the message was not sent, issued a high tone hint sound, and screen displays text
message sent failure. If message sent failure, radio will return to chance to return to the
retransmission selection screen
Send Quick Text
Two way radio support maximum 50 programming of prefabricated text messages by the
,
agent:
!
When a predefinedtext message, you can edit every message beforeyou can send each rnessaqsl
411
l!
Using the Menu
1. Press [
m ]
key to enter the Menu.
2. Press the
[DorO]
key to Messages, and then press
[m]
key to choose.
3. Press
[D orO]
key to Quick Text, press
[m]
key to choose
4.Press[D
orO]
key to the required quick text,press
[m]
key to choose
5. A flashing cursor appears, using the keyboard to input messages, press
[D]
key to move
to the left one, press[O ]button to the right one, when editing area have content ,press
the
[EI]
key to delete any useless character, otherwise when editing area without con-
lent lo return to the higher level menu.
6. After writing the text message, press
[m]
to choose to send or save.
7. If the messages sent successfully, issued a prompt sound, and the screen displays text
message has been sent,
Or if the message was not sent, issued a high tane hint sound, and screen displays text
message sent failure. If message sent failure, radio will return lo chance to return lo the
retransmission selection screen.
8.After Choose send press
[D orO]
lo the alias or ID, and then press
[m]
key to choose.
Or press
[D orO]
key to manual dialing, and then press
[O
k] key choice. Enter the user
alias or ID, then Press
[m].
9. The screen shows message: < user/group name or ID > cali, lext messages were a being
sent lo confirm.
10. If the messages sent successfully, issued a prompt sound, and screen display lext
142
To Next Page
Loading...
Need help?
General
