TYT TH-7800 - #7 DCS.COD; #8 DCS.N;R

# 9 DSP.MOD
Function: select Memory channel display mode.
Available Values: DSP.FRQ / DSP.NAM
Default: DSP.FRQ
40
# 10 DTMF D
Function: setting of the DTMF autodialer delay time.
Available Values: 50 / 250 / 450 / 750 / 1000 MS.
Default: 450 MS.
# 11 DTMF S
Function: setting of the DTMF autodialer sending speed.
Available Values: 50 / 75 / 100 MS.
Default: 50 MS.
# 12 DTMF W
Function: loading of the DTMF autodialer memories.
16 DTMF autodialer memories are available.
# 13 HYPER
Function: enable/disable the automatic writing feature for the Hyper Memory.
Available Values: MANUAL / AUTO
Default: MANUAL
# 14 KEY.MOD
Function: select the key functions for the "right" band function switches.
39
# 4 BEEP
Function: enable/Disable the beeper
Available Values: BEP.ON / BEP.OFF
Default: BEP.ON
# 5 Clock frequency shift - CLK.SFT
Function: shifting of CPU clock frequency
Available Values: SFT.ON / SFT.OFF
Default: SFT.OFF
# 6 DIMMER
Function: setting of the display brightness level.
Available Values: DIM. OFF / 1 / 2 / 3 / 4
Default: DIM 3
# 7 DCS.COD
Function: setting the DCS code.
Available Values: 104 standard DCS codes.
Default: 023
# 8 DCS.N/R
Function: select "Normal" or "Inverted" DCS coding.
Available Values: TRX N / TX R / RX R / TRX R
Default: TRX N