42
# 24 RPT.MOD
Function: set the repeater shift direction.
Available Values: RPT.OFF / RPT.- / RPT.+
Default: RPT.OFF
Note: The repeater shift can be set independently on both the "left" and "right" bands.
Default: BAND
# 20 PG P2
Function: program the microphone's [p2] button assignment.
Default: VFO/MR
# 21 PG P3
Function: program the microphone's [p3] button assignment.
Default: TONE
# 22 PG P4
Function: program the microphone's [p4] button assignment.
Default: LOW
# 23 RF SQL
Function: Adjustd the RF SQL threshold level.
Available Values: OFF / S-2 / S-5 / S-9 / S-FULL
Default: OFF
Note: The Menu Item can be set independently on both the "left" and "right" bands.
# 15 LOCK
Function: enable/disable the Key/Button Lock feature.
Available Values: MANUAL / AUTO
Default: MANUAL
41
Available Values: KEY1 / KEY2
Default: KEY1
# 16 LOCKT
Function: enable/disable the PTT lock feature.
Available Values: OFF / BAND R / BAND L / BOTH
Default: OFF
OFF: Enable the PTT switch.
BAND R: Disable the PTT switch on the "right" band.
BAND L: Disable the PTT switch on the "left" band.
BOTH: Disable the PTT switch on the "both" band.
# 17 MUTE
Function: select the audio mute mode.
Available Values: OFF / TX / RX and TX/RX
# 18 NAME
Function: store an alpha tag for a memory channel.
# 19 PG P1
Function: program the microphone's [P1] button assignment.
To Next Page
Loading...
