Power On Password Setup
Enable this function,you have to insert a matching PIN to enter into normal status when
1. Press and hold key for over 2s to enter general setting
menu.
2. Press / key to choose No.28 menu, LCD displays
"CODE-OF".
3. Turn selector knob to enable/disable password setup.
ON: Turn on Pin setup
OFF:Turn off Pin setup
4. Press key to confirm and exit.Default:OFF
Address list
You store desired ID and corresponding ID name in address list.The LCD displays ID
corresponding name if radio received ANI calling and find matching ID in address list.
1. Press and hold key for over 2s to enter general setting
menu.
2. Press / key to choose No.29 menu, LCD displays
"BOOK".
3. Turn selector knob to select the desired group [00-127], total
is 128 group ID.
4. Press key to confirm and exit.
44
P1 P2
P1 P2
P5
Factory Default
If your radio seems to be malfunctioning, resetting the microprocessor may solve the
problem. When performing the reset, you may lose memory data and stored information.
Back up or write down important data before performing the reset.
1. Press and hold key for over 2s to enter general setting menu.
2. Press / key to choose No.30 menu, LCD
displays"RESTORE".
3. Turn selector knob to select the desired operation.
FACT:Resume factory default for channel,signaling and general
setting.
SETUP:Return initial setup for No.18- No 28 general setting
menu.
4. Press key to confirm.
45
P1 P2
P4
radio is turned on.
To Next Page
Loading...
