TYT TH-9000D User Manual

61
Receiver (ETSI EN 300 086 standard testing)
Transmitter (ETSI EN 300 086 standard testing)
Wide band
*0.25µV
*70dB
*65dB
*70dB
+1*-3dB(0.3*3KHz)
*45dB
Sensitivity (12dB Sinad)
Adjacent Channel Selectivity
Intermodulation
Spurious Rejection
Audio Response
Hum & Noise
Audio distortion
Audio power output
Narrow band
*0.35µV
*60dB
*60dB
*70dB
+1*-3dB(0.3*2.55KHz)
*40dB
*5%
*2W@10%
Wide band
16K
*
F3E
*70dB
*40dB
*60dB
+1*-3dB(0.3*3KHz)
Power Output
Modulation
Adjacent Channel Power
Hum & Noise
Spurious Emission
Audio Response
Audio Distortion
Narrow band
VHF 65/25/10W ; UHF 45/25/10W
11K
*
F3E
*60dB
*36dB
*60dB
+1*-3dB(0.3*2.55KHz)
*5%
60
200 channels
25K (Wide Band) 12.5K (Narrow band)
5KHz*6.25KHz*8.33KHz*10KHz*12.5KHz*15KHz*20KHz*
25KHz*30KHz*50KHz
13.8V DC *15%
Carrier/CTCSS/DCS/5Tone/2Tone/DTMF
*2.5ppm
-20*+60*
145(W)x47(H)x190(D)mm
about 1.2kg
General
Frequency Range
Number of Channels
Channel Spacing
Phase-locked Step
Operating Voltage
Squelch
Frequency Stability
Operating Temperature
Dimensions(WxHxD)
Weight
NOTE: Specifications are subject to change without notice due to advancements in technology.
Specifications
Tx: 144-148 ,Rx:136-174MHz (FCC 150MHz Version)
Tx: 222-225 ,Rx:220-260MHz (FCC 220MHz Version)
Tx: 420-450 ,Rx:400-490MHz (FCC 450MHz Version)
Tx/Rx:138-174MHz (IC 150MHz Version)
Tx/Rx:406-470 (IC 450MHz Version)

TYT TH-9000D Specifications

General

Operating Voltage	13.8V DC ± 15%
Antenna Impedance	50Ω
Weight	1.2 kg
Frequency Range	136-174 MHz (VHF), 400- MHz (UHF)
Output Power	60W/25W/10W (VHF) / 45W/25W/10W (UHF)
Channel Capacity	200 channels
Channel Spacing	12.5/25 kHz
Squelch	Carrier/CTCSS/DCS
Modulation	FM
Operating Temperature	-20°C to +60°C