Figure 31 – Ice Cube Mold
4. Reinstall front access cover.
5. Reconnect power to ice maker.
OUTDOOR USE
Some CLR2060 models are designed to operate outdoors. Special
considerations include the following:
• For best performance, keep the unit out of direct sunlight.
•Turn the unit OFF and dispose of any ice cubes if the unit will not be
used for 5 days or more. Prop door open to allow for air circulation
and prevent mold and mildew.
• If the ambient temperature is expected to drop below 45°F, drain all
water from the unit to prevent freezing damage not covered by the
warranty.
• High ambient temperatures (110°F or higher) may reduce the unit’s
ice production rate.
SAMPLE AREA
ICE005
27
Body_UM.qxd 12/17/04 9:16 AM Page 27
To Next Page
Loading...
