30
User’s Manual
CONDENSER CLEANING — EVERY 3 MONTHS
To maintain operational efficiency, clean the condenser every three
months (depending on environmental conditions, more or less fre-
quent cleaning may be necessary).
Disconnect electric power to the ice maker
before cleaning the condenser.
To remove and replace the grille for access to the condenser fins
follow this procedure:
Figure 32
1. Remove the screws at each end of the grille (see Figure 32).
2. Remove the grille.
DO NOT touch the condenser fins. The condenser fins are
SHARP and can be easily damaged.
DO NOT use any type of cleaner on the condenser unit.
CAUTION
UL317A
I
C
E
O
F
F
C
L
N
CONDENSER
!
WARNING
Body_UM.qxd 12/17/04 9:16 AM Page 30
To Next Page
Loading...
Need help?
General