PAGE 3 OF 9 0621 IH-3642
CHAIR ADJUSTMENTS
1. Seat Height Adjustment – To raise seat height, lift
lever up with little to no weight on the seat. To lower
seat height, lift lever up while sitting.
2. Upright Tilt Lock – To lock chair in an upright position,
push the lever in toward the center of the seat. To
restore tilt, pull lever out. Chair has standard tilt; the
seat and back tilt simultaneously at the same ratio.
3. Tilt Tension – To increase tilt tension, turn knob
clockwise. To decrease tilt tension, turn knob
counterclockwise.
-800-295-551
ASSEMBLY CONTINUED
5. Slowly lower chair assembly onto the gas lift. Press
down on seat cushion to secure. (See Figure 5)
Figure 5
3
1, 2