PAGE 2 OF 6 0621 IH-6675
ASSEMBLY INSTRUCTIONS CONTINUED
MAINTENANCE
Figure 3
Figure 4
Figure 5
3. Attach handle to mirror using included hex bolts and
9/16" wrench. (See Figure 3)
4. Remove protective cover on center bolt of caster
assembly. (See Figure 4)
5. With included lock washer placed onto center
assembly center bolt, tighten caster assembly to
threaded hole in center of mirror back. Use flathead
screwdriver as necessary. (See Figure 5)
To clean mirror, use a mild glass cleaner and a
soft cloth.
WARNING! Do not use any cleaner containing
ammonia, as this could damage the mirror.
-800-295-551
To Next Page
Loading...
