UAV-1002156-001
ECCN 7A994 Page 15 | 31
Altimeter Cross Check
The reported altitude must be cross-checked against the aircraft’s altimeter
during pre-flight.
Harmful Interference
It is the responsibility of the pilot to ensure that the transceiver causes no
harmful interference to other onboard equipment and systems.
Configurable Options
Accessing or altering configurable options not intended to be operated
during flight by the pilot in comannd, as this may cause pilot distraction.
See and Avoid
The SkyEcho 2 is intended to be an aid to ‘see and avoid’. Maneuvers to
regain adequate separation should not be based on alerts issued by this
device or connected applications alone.
Approvals
Approvals do not cover adaptations to the aircraft necessary to
accommodate ancillary equipment such as power provisions, mounting
devices or external antennas, such items must still be approved under
existing minor modification/change processes applicable to the aircraft.
Warning: This transceiver is to be used to improve pilot situational
awareness only and as a navigational aid. It is not intended for use in IFR
flight conditions. uAvionix is not responsible for the transceiver’s end use
and will not be held liable for any events occurring from its use or misuse.
Usage Outside of the United Kingdom
Transmit functionality is currently approved for use only in the United
Kingdom. If flying outside of the UK, configure the device for receive
functionality only or consult your local regulator for approval.
To Next Page
Loading...
