UAV-1002156-001
ECCN 7A994 Page 19 | 31
Click on “SkyEcho Setup” to configure
SkyEcho with your aircraft information.
A configuration page similar to the following should load:
For proper operation the following parameters must be configured:
• 1090ES Transmit
• Receiver Mode
• ICAO Address (hex)
• Call Sign
• Emitter Category
• VFR Squawk
• ADS-B In Capability
• Air/Ground Threshold Speed (V
S0
)
• Aircraft Length
• Aircraft Width
• Lateral GPS Offset
• Longitudinal GPS Offset
After configuration of your parameters click on “Apply” to save.
To Next Page
