- During dehumidifying mode,remove the drain
plug from the back of the unit. You can also connect
For models without
a drain connector, just attach the drain hose to
the hole. Place the open end of the hose directly
over the drain area in your basement floor. Please
refer to Fig.19 & 20.
-
When the water level
in
the bottom tray reaches
a predetermined level,
Carefully move the unit to a drain location,
remove the bottom drain plug and let the
water drain away (Fig.2
1
). Reinstall the bottom
drain plug and restart the machine until the P1
symbol disappears. If the error repeats, call for
service.
" "
the unit beeps 8 times and
the digital display area shows P1 . At this time
the air conditioning/dehumidification process will
immediately stop. However, the fan motor will
continue to operate (this is normal).
" "
Fig.19
Fig.20
Fig.21
INSTALLATION INSTRUCTIONS
Water drainage:
a 3/4''(1.9cm) garden hose (sold separately) onto
the drain connector (5/8''(1.6 m) universal female
mender already on the unit).
12
R emove the
drain plug
Continuou s
drain hos e
Drain plug
Bottom dra in plug
To Next Page
Loading...
