Uberhaus 87795040 - OPERATING INSTRUCTIONS; Protection Codes and Mode Operations

Operating Instructions
- Press the MODE button until the COOL
indicator light comes on.
- Press the ADJUST buttons " " or " " to
select your desired room temperature. The
temperature can be set within a range of
17°C~30°C or 62°F~88°F.
- Press the FAN SPEED button to choose the
fan speed.
- Press the MODE button until the DRY
indicator light comes on.
- Under this mode, you cannot select a fan
speed or adjust the temperature. The fan
motor operates at LOW speed.
- Keep windows and doors closed for
the
best dehumidifying effect.
- Do not connect the duct in the window.
COOL operation
DRY operation
AUTO operation
- When you set the air conditioner in
AUTO mode, it will automatically select
cooling,or fan only operation depending
on what temperature you have selected
and the room temperature.
FAN o pe r at ion
SLEE P op er a t ion
- The air conditioner will control the room
temperature automatically to the
temperature set by you.
- Under AUTO mode, you cannot select
the fan speed.
When
the SLEEP button is pressed, the
selected temperature will increase ( in
1 in 30 minutes.
The temperature will then increase ( in
1 after an
additional 30 minutes. This new
temperature will be maintained
for 7 hours
before it returns to the originally selected
temperature. This ends the Sleep mode
and the unit will continue to operate as
originally programmed
O O
O O
C/2 F
C/2 F
This feature is unavailable under
FAN or DRY mode.
NOTE:
OPERATING INSTRUCTIONS
cannot
)
by
cooling mode
) by anothercooling mode
6
Pro tection code:
P1-
Bottom tray is full - Connect the
drain hose and drain t he colle cted
water a way. If error re peats, call
for ser vice.
NOTE: When more than one error occurs,
the priority of the code display order is:
E4--E2--E1--P1.
in the