IDENTIFICATION OF PARTS
Accessories
PARTS
YTITNAUQEMANSTRAP
Foam seal
Exhaust hose , adapter (flat mouth)
Window slider kit and bolt
1 set
1 set
Check that all the accessories are included in the package and please refer to the installation instructions
for their usage.
All illustrations in this manual are for explanation purposes only. Your air conditioner
may be slightly different. The actual unit shall prevail.
NOTE:
Remote control and battery
(For models with remote control only)
1 set
Drain hose
1 pc
(non-adhesive type)
Foam seal
(adhesive type)
Suggested tools for window kit installation
1. Screwdriver(medium size Phillips)
2. Tape measure or ruler
3. Knife or scissors
4. Saw (In the event that the window kit needs to be cut down in size because
the window is too narrow for direct installation)
The air conditioner must be operated within the temperature range indicated below:
Operating conditions
MODE OOM TEMPERATURE
COOL
DRY
Note: Performance may be reduced outside of these operating temperatures.
(The bolt is in the poly bag containing
the instruction manual)
3
2 pcs
4 pcs
To Next Page
Loading...
