Ubiquiti UAP-IW-HD User Manual

Cover Plate UAP-IW-HD Back Plate
Wall-Mount Screws (Qty. 4) Torx Screws (Qty. 2) Phillips Screws (Qty. 2)
Torx Security Screw Phillips Security Screw
Package Contents
Installation Requirements
Pre-installed electrical wall box
Category 5 (or above) UTP cabling approved for indoor use
Phillips and athead screwdrivers
T10 Torx bit (for Torx Screw option)
UAP-IW-HD Quick Start Guide

Ubiquiti UAP-IW-HD Specifications

General

Brand	Ubiquiti
Model	UAP-IW-HD
Category	Wireless Access Point
Language	English

Summary

Package Contents

Installation Requirements

System Requirements

Hardware Overview

Back Panel

Details the rear side of the UAP-IW-HD, highlighting the Ethernet port and its function.

Bottom Panel

Details Ethernet ports (PoE Out + LAN 1, LAN 2-4) and the Reset button functions.

Side Panel

Mentions the side panel, but no specific details are provided in this section.

Component Descriptions

Security Screw

Describes the optional security screw used to secure the cover plate after installation.

Security Tab

Describes the security tab that helps secure the cover plate and how to depress it.

Back Plate Mounting

Hardware Installation

Software Installation

Mobile App Installation

Specifications

Limited Warranty

Compliance Information

FCC Compliance

Details FCC rules compliance, including conditions for operation and interference limits.

ISED Canada Compliance

Details ISED Canada compliance requirements for license-exempt radio apparatus.

Radiation Exposure Statement

States compliance with radiation exposure limits and minimum installation distance.

Regulatory Statements

WEEE Compliance Statement

Statement regarding Waste Electrical and Electronic Equipment compliance.

Declaration of Conformity

Formal declaration of product conformity with applicable directives.

Online Resources

Provides links to further information and support for the product.