Ubiquiti UVP - Call Settings

27
Chapter 5: Phone ScreenUniFi® VoIP Phone User Guide
Ubiquiti Networks, Inc.
Settings
To access the phone’s settings, press Settings on the
Phone screen. Settings include the following:
SIP service Select this option to configure the phone’s SIP
settings:
• SIP accounts Select this option to manage the phone’s
SIP accounts. You can add a new SIP account or edit an
existing SIP account.
• Audio codecs Select this option to select the audio
codec(s): G.722, G.711 PCMA, G.711 PCMU, GSM, Speex
16k, Speex 8k, Speex 32k, iLBC, OPUS.
• Developer options Select this option to edit the log
level:
- Level 0 Display fatal error only
- Level 1 Display error messages and more severe
verbosity level only
- Level 2 Display Warning messages and more severe
verbosity level only
- Level 3 Info verbosity (normally used by applications)
- Level 4 Important PJSIP events
- Level 5 Detailed PJSIP events
- Level 6 Very detailed PJLIB events
Call Select this option to configure the phone’s call
settings:
• Show keypad when handset if lifted This option
enables or disables display of the keypad whenever the
handset is lifted.
• Launch app when handset is lifted This option is
automatically enabled if Show keypad when handset is
lifted is disabled.
• Select SIP account when making a call This option
enables or disables selection of the SIP account
whenever the handset if lifted.
• Incoming call action Select one of the following: Ring,
Do not disturb, Forward, or Auto-answer.
• Call forwarding URL
• DTMF type Select either RFC-2833 or SIP INFO.
Controller This displays the status if the phone has been
adopted by the UniFi Controller software.
About Select this option to access the following SIP
information and settings:
• App version This displays the App version.
• Clear all provision data Select this option to clear all
provision data.
WARNING: Selecting this option will permanently
erase all of your provision data.
• Check update Select this option to check for software
updates.
Do Not Disturb
The Do Not Disturb feature allows you to disable the
phone’s ringer and cause all incoming calls to roll over to
voice mail.
To enable the Do Not Disturb feature, press Do Not
Disturb on the Phone screen. The screen changes to the
following:
While Do Not Disturb is enabled, the phone will not ring
when incoming calls are received. Instead, callers will be
directed to voice mail where they will be allowed to leave
messages for you.
To disable the feature so that the phone will ring when an
incoming call is received, press Do Not Disturb again.
Quit
To exit the Phone screen and return to the Home screen,
press Quit .
Contact List
To access the phone contact list, press Contacts on the
Phone screen.
Voice Mail
To access voice mail, press Voicemail on the Phone
screen.
Recent Calls
To see a list of recent calls, press Recent on the Phone
screen.