EVK-R5 - User guide
UBX-19042592 - R06 Appendix Page 16 of 23
C1-Public
B.2 Configuring a new connection
1. Open the Control Panel, go to the Network
and Sharing Center, and select “Set up a
new connection or network”.
2. Select “Connect to the Internet” and click
“Next”.
3. Select “Dial-up” and, if requested, the
modem previously installed.
4. Enter the parameters for the dial-up
connection:
o The module telephone number:
*99***1#
(to be changed if using a PDP context
different from 1)
o The specific account information for
the network operator
o A name for the connection (e.g., “R5
Dial-up”)
The packet data connection is now ready to be used with EVK-R5. Click “Connect” to start the
connection, then start a browser to check internet connectivity.
Consult the cellular network operator for username and password. In most cases, they can be left
empty.
To Next Page
Loading...
