Uconnect 5.0 NAV Owner's Manual

Phone
Making and answering hands-free phone calls is easy
with Uconnect. When the Phonebook button is illumi-
nated on your touchscreen, your system is ready. Check
UconnectPhone.com for mobile phone compatibility
and pairing instructions.
Push the PHONE button
. After the beep, say one of
the following commands:
• Call John Smith
• Dial 123-456-7890 and follow the system prompts
• Redial (call previous outgoing phone number)
• Call back (call previous incoming phone number)
TIP: When providing a Voice Command, push the
PHONE button
and say “Call,” then pronounce the
name exactly as it appears in your phone book. When
a contact has multiple phone numbers, you can say
“Call John Smith work.”
Voice Text Reply
Uconnect will announce incoming text messages. Push
the PHONE button
and say Listen. (Must have
compatible mobile phone paired to Uconnect system.)
1. Once an incoming text message is read to you, push
the PHONE button
. After the beep, say... “Re-
ply”
2. Listen to the Uconnect prompts. After the beep, repeat
one of the pre-defined messages and follow the system
prompts.
30 UCONNECT 5.0/5.0 NAV VOICE RECOGNITION QUICK TIPS

Uconnect 5.0 NAV Specifications

General

Brand	Uconnect
Model	5.0 NAV
Category	Car Receiver
Language	English