Uconnect 5.0 NAV Owner's Manual

Clock Setting
1. To start the clock setting procedure, perform either of
the following:
• Push the Settings button located on the faceplate,
press the “Time” button and then press the “Set”
button.
• Push the Settings button located on the faceplate,
then “Clock and Date” button, and then the “Set
Time and Date” button. Select the “Up or Down”
arrows as appropriate. Select “Done” when com-
plete.
NOTE: In the Clock Setting Menu you can also select
Display Clock. Display Clock turns the clock display in
the status bar on or off.
2. Press the “Up” or “Down” arrows to adjust the hours
or minutes, next select the “AM” or “PM” button. You
can also select 12hr or 24hr format by pressing the
desired button.
3. Once the time is set press the “Done” button to exit the
time screen.
42 SETTINGS BUTTON

Uconnect 5.0 NAV Specifications

General

Brand	Uconnect
Model	5.0 NAV
Category	Car Receiver
Language	English