The following example shows how to use voice control to
plan a journey to your Home address:
1. Push the “Voice Recognition” button on the steering
wheel to turn on the microphone.
You see a screen with examples of com-
mands you can say.
NOTE: Press the “Help” button in the Main menu then
press “What can I say?” to see a full list of commands you
can say.
2. When you hear a beep, say a command of your choice.
For example, you can say “Navigate home.”
For some phrases, you are asked for confirmation.
NOTE: For the best recognition of what you say, speak
normally without trying to articulate words in an un-
natural way. If there is excessive road noise, for example,
you may need to speak in the direction of the micro-
phone.
3. If the command is correct, say “Yes.”
If the command is incorrect, say “No” and repeat the
command after you hear the prompt and tone again.
Your navigation system plans a route from your
current location to your destination.
NOTE: To stop your navigation system from listening
out for further commands, say “Cancel.”
The Driving View
About The Driving View
When your TomTom navigation system starts for the first
time, you are shown the Driving View along with de-
tailed information about your current position.
Press the center of the touchscreen, at any time, to open
the Main Menu.
56 NAVIGATION
To Next Page
Loading...
Need help?
General
