• “Show Paired Phones” or
• “Connect My Phone”
Pair A Bluetootht Streaming Audio Device
• Touch the “Player” or “Media” soft-key to begin,
• Change the Source to Bluetootht,
• Touch the “Bluetootht” soft-key to display the Paired
Audio Devices screen,
• Touch the “Add Device” soft-key,
NOTE: If there is no device currently connected with the
system, a pop-up will appear.
• Search for available devices on your Bluetootht en-
abled audio device. When prompted on the device,
enter the name and PIN shown on the Uconnect
Touch™ screen,
• Uconnect™ Phone will display an in process screen
while the system is connecting,
• When the pairing process has successfully completed,
the system will prompt you to choose whether or not
this is your favorite device. Selecting Yes will make
this device the highest priority. This device will take
precedence over other paired devices within range.
NOTE: For devices which are not made a favorite, the
device priority is determined by the order in which it was
paired. The latest device paired will have the higher
priority.
You can also use the following VR command to bring up
a list of paired audio devices.
• “Show Paired Audio Devices”
1
Uconnect™ ACCESS USER’S MANUAL 69
To Next Page
Loading...
Need help?
General
