Flight Operations
Mobile phone connect with Drone
Mobile Phone Installation
Press down
① Turn on the prower on the transmitter, the
transmitter indicator light will flash quickly.
② Pull the left stick until bottom
and then release, the transmitter
power-LED will flash slowly, and
enter frequency pairing.
③Turn on power switch of drone, the indicator
light becomes from shiny to long bright which
indicating the drone is in the state of successful
opposite frequency.
It must be placed on the horizontal ground.
Transmitter connect with Drone
Frequency Pairing
②
The clamp will automatically clamp the mobile phone .
Notice：Don't clip the buttons on the side of the phone.
Take out the phone holder:
Press the buckle of the phone holder to close it and take it out.
Pull out
Put in
the phone
Insert
①
Socket
Phone holder
04
This software is suitable for mobile phones in the
IOS 9.0 or later and Android 4.4 or later system.
Please read the " Help" of APP for more use.
Download and install APP: Flyingsee
To Next Page
Loading...
