1.The LAN port of the PoE power supply is connected to the PC, router, and
switch.
2.According to the requirements, prepare a long enough network cable（Recom
mended within 20 meters, must Cat 5e or up） to connect the wireless bridge and
the PoE power supply. The PoE port of the PoE power supply is connected to the
LAN/PoE port of the wireless bridge.
3.Must use attached 24V~1A PoE power supply, do not support 48V PoE power
adapter and PoE switch power supply (transferable data). Support 12V~1A DC
power supply, not included.
PoE Power Supply
1. Transmit wireless network signal
2. Transmission of the camera video signal
To Next Page
Loading...
